Products  >  Find By Category>  Peek-A-Flame
>Browse By Category
>Browse By Application
>Browse By Industry
>Browse By Catalog Section
>Service and Support
>Search for Product
>Search for Parts
>Case Studies
>Exothermics Products
>Tradeshow Schedule
>Eclipse Engineering Guide
Peek-A-Flame
Peek-A-Flame
The Peek-A-Flame Relay Series 7000 is a sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod. The Peek-A-Flame is for flame detection only; it will not detect safe start, safety lockout, load switching or any other safety procedures.
  • UL recognized, CSA certified, & FM approved.
  • Plugs into an Industry Standard 11-pin base.
  • Test point at the front permits direct reading of the flame signal level, 0-12 VDC.
  • "Flame On" Light
  • "Flame Fail" Light indicates Test condition and can be activated remotely. By applying 12-120 VAC or VDC to Pin #10. Contacts are also activated between Pin #5 and Pin #6. A test signal is ouput on Pin #11.
  • Analog output on Pin #11 for remote monitoring by a PLC or similar device.
New at Eclipse
At Eclipse we stay ahead of our competitors by promising: Safe.Reliable.Efficient.Clean.
Product Documentation
Find the documentation you're looking for in the Eclipse Product and Information Center.
Need Help finding your sales rep? Call (815) 877-3031
Social Media
Find Eclipse on all the social media sites. You Tube, Facebook, Twitter

Connect with us today.
Eclipse, Inc.  1665 Elmwood Rd.  Rockford   IL   61103   USA   815-877-3031   

©2009 Eclipse, Inc.